Puggle

A A A A Author Topic: CX500E Swing arm pivot cover.  (Read 105 times)

ericclapham

CX500E Swing arm pivot cover.
« Started on: 07-Apr-18, 12:45 »
I recently purchased a 500 frame from my local wrecker as part of an on-going project. On one end of the swing arm, where there is normally a black plastic plug, I found this aluminium one. The other one has been lost/misplaced. Any one got a matching one ? or know where I could buy a pair ? I quite like the idea of a bit of mild bling in that area.

VC3

Re: CX500E Swing arm pivot cover.
« Reply #1 on: 07-Apr-18, 13:40 »
Café Racer Kits in the UK sells alloy frame plugs for CX500's - I don't know if they fit the CX500E:

https://www.caferacerkits.co.uk/shop#!/CX-Frame-Plugs/p/72512742/category=20704174

Someone with a lathe could turn one for you, I'd think.

J.C.

Re: CX500E Swing arm pivot cover.
« Reply #2 on: 07-Apr-18, 15:49 »
I reckon a previous owner was a fitter machinist... or knew one!

 


Website and forum protected by
 STOP FORUM SPAM       Bad Behavior      Stop Spam Harvesters, Join Project Honey Pot      Let's Encrypt