Puggle

Website Migration


A A A A Author Topic: Brake Caliper Piston  (Read 135 times)

Cass

Brake Caliper Piston
« Started on: 09-Oct-19, 15:55 »

VC3

Re: Brake Caliper Piston
« Reply #1 on: 09-Oct-19, 16:41 »
If you don't get an expert's reply, poking around on the CMSNL site might give you the answer:

https://www.cmsnl.com/honda-cx500_model232/

I'd guess JC knows, though......and where best to source the part also.

VC3

J.C.

Re: Brake Caliper Piston
« Reply #2 on: 09-Oct-19, 16:45 »
Have a browse through the parts fiches:

https://motofaction.org/motorcycles/how-to-identify-find-parts-part-numbers-sources-honda-triumph-yamaha-kawasaki-suzuki-etc-fiche-fishing/

There's three different size pistons used in the 500s - single side single pot uses the biggest (43mm), dual side single pot the middle size (38mm?) and dual side dual pot the smallest (30/32mm, I forget which). Neither of those models will be dual side dual pot.

From memory the Deluxe was single pot, single side - so... 43mm - and the AU CX500B should be single pot dual side, so 38mm or whichever the middle size is - so I'm guessing no go.

Cass

Re: Brake Caliper Piston
« Reply #3 on: 09-Oct-19, 17:12 »
Think your right JC. Different part# Why are they selling as a pair when the CX500D '81 only has 1 brake caliper?

CX PHREAK

Re: Brake Caliper Piston
« Reply #4 on: 09-Oct-19, 18:43 »
You want 38 mm for twin disc Jeremy.

The listing includes CX500 as they use {one} of these pistons but the CX listing has likely been tacked onto the CB900 etc listing by part number alone.

 


Website and forum protected by
 STOP FORUM SPAM       Bad Behavior      Stop Spam Harvesters, Join Project Honey Pot      Let's Encrypt

Puggle